Description
This product is most likely discontinued – use universal PARROT instead!
What this tool is about
This diagnostic tool (product) is a hardware component – basically ready to use kit that can convert an electric kick-scooter into personal. It does work with stock scooter components.
Product is suitable for diagnostic “Bird Zero” scooter (similar to Electisan F350, Okai and scooter with the same components setup – ES-100 ESC.
Note: do not connect this module to different vehicles.
With this tool you can check whether your vehicle:
- turns on/off (powers on)
- dashboard turns on/off (shows speed, battery and light state info)
- front lights toggles on/off (independent from power state)
- has speed limit on front wheel motor (can be turn off or on)
- switching between different speed limits on the fly
New brain is ready to use, plug and play – it will completely fit inside the steering tube due to small dimensions.
You can get rid of entire box (GPS tracking unit) located in front of scooter, for testing ride time.
Device is designed to be use with (capacitive touch sensor) metal plate or with physical press button.
Device has wires to connect small speaker for audio feedback.
End user has to solder connection wires only (main plug, touch plate, speaker. all of this = 9 color coded cables) – you’ll find more info in instruction.
Please read FAQ tab prior placing your order, maybe you will find some interesting things there.
Warning statement
We strongly discourage anyone from using this tool on any scooter beside your own. We are not responsible for using this device i way other than for diagnosis purpouse. Please read the “terms of service” before buying this product. The product is sold as it is, without any guarantee of compatibility with your specific copy of vehicle due to possible manufacturer hardware changes.
Usage (touch commands)
How to use, what this tool can do
To start testing scooter user has to input 4 digits pass code after long press. Codes are unique, you can choose your own code for safety reason – to protect the tool or vehicle against unauthorised access.
Example of unlock procedure:
- initiate unlock attempt by single long touch
- you’ll hear the *electric sound*, vehicle is expecting code now, so:
- 2 touches, 5 touches, 1 touch, 2 touches – stands for code ”2512”
- if entered code was correct, you’ll hear the *sound* effect
- scooter will blink the front light few times and dashboard will turn up
- at this time, vehicle is ready to roll and further testing.
To turn off scooter:
- sequence of 4 long presses should be performed
To limit max speed and acceleration:
- sequence of 10 touches should be performed (works both way)
- you’ll hear the *sound*
To swap limit speed combo:
- sequence of 20 touches should be performed
- you’ll hear the *sound*
To toggle on/off lights:
- double tap should be performed
Multiple speeds settings (BETA), one is unlocked/full potential of motor, second option is throttled down to certain speed – you can switch it on the fly for ex. to meet the law rules or to limit speed for newbie riders.
We actively work on further firmware upgrades – see changelog.
Bulk pricing
Bulk prices
You ask us about discounts in bulk orders… a lot, so there you have it:
| from 2 pcs. |
price is discounted by |
3% |
| from 5 pcs. |
price is discounted by |
5% |
| from 10 pcs. |
price is discounted by |
10% |
| from 15 pcs. |
price is discounted by |
15% |
| from 20 pcs. |
price is discounted by |
25% |
| from 30 pcs. |
price is discounted by |
30% |
+ additional energy points for each unit purchased unit as in standard order
FAQ for this product
This FAQ is not fully relevant to every tool.
Wiring scheme
Wire voltage across harness in our tool
Please measure outgoing voltage in wires from your scooter and do not exceed this rates.
Do not missmatch polarity.
In worst case scenario electrolytic capacitor on our tool can blow off. This is safety warning, please use this tool with scooter that it’s made for only – or took precautions steps assuming case of module failure (smoke and case discharge).
Connect this tool as last part of your scooter circuit system to avoid voltage overload.
Red: max. 42V (+)
Black: Ground (-) (do not apply voltage here)
Blue: 3.3V (+)
Green: Signal
Yellow: Signal
Brow: Ground (-)
Orange: Signal (do not apply voltage here)
Purple/Pink: Signal (+) (use 2 wires for touch input metal plate or 1 for push button)
White/grey: Ground (-) (for push button)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.